Diverter valves for bulk materials

A diverter valve directs or stops the flow of bulk material in a pipe, chute or spout. With a two-way or three-way diverter valve, one conveyor can feed two or three different silos, hoppers or machines.

We build steel diverter valves to order. The cross-section, flanges and drive are chosen for the material, the capacity and the installation site.

  • Directs the material to two or three outlets
  • Shuts off the flow when needed
  • Manual, electric or pneumatic drive
  • Flanges to match the pipes and machines on site
  • Built to the dimensions of your site
Rectangular diverter valve in mild steel, built by Silozni Sistemi

With every diverter valve, Silozni Sistemi offers

Screw conveyor and diverter valve on site, handling wood particles

Diverter valve applications

Diverter valves are installed in pipes and spouts after screw conveyors, bucket elevators and chain conveyors. Most often they distribute the material between several silos or hoppers without the need for a second conveyor.

They are used for:

  • Distribution of grain and feed – to different silos, hoppers or lines in grain terminals and feed mills.
  • Diverting cement and powdered materials
  • Distribution after bucket elevators
  • Shutting off pipes and spouts
  • Switching between two production lines

The diverter valve is installed under the elevator or screw conveyor and splits the flow to two or three silos.

Diverter valve types and design

We build three main types:

  • Two-way diverter valve – one inlet and two outlets. The moving flap sends the material to one outlet or the other.
  • Three-way diverter valve – one inlet and three outlets. Used when three silos or hoppers must be filled from one point.
  • Butterfly valve – a disc turns inside the pipe to close or open the flow.
  • Body – carbon (mild) steel. The cross-section and the outlet angles are matched to the pipes on site.
  • Shaft and bearings – the flap is fixed to a shaft with bearings outside the material zone.
  • Flanges – inlet and outlet flanges are made to match the pipes and machines the valve connects to.
  • Drive – manual lever, electric motor or pneumatic cylinder. The choice depends on how often the valve switches and whether it is controlled from a panel.
Butterfly valve with inlet and outlet flange
Screw conveyor with a diverter valve at the outlet

Benefits of our diverter valves

One conveyor for several silos – with a diverter valve you do not need a separate conveyor for each silo.

Safe and reliable operation – robust body and shaft, correctly selected for the material.

Easy maintenance – the moving parts are accessible and the spare parts are standard.

Quick installation – delivered ready for installation, with flanges to suit your site.

Good value – in-house manufacturing gives a fair price without compromising on quality.

Diverter valve drive options

The drive is chosen to suit how the site operates:

  • Manual lever – where the valve is switched rarely
  • Electric – with a motor, for switching from a control panel
  • Pneumatic – with a cylinder, when compressed air is available on site
  • Transitions and spouts – to connect to the pipes, the screw conveyor or the elevator
Round butterfly valve, inside view

Diverter valve photos

Photos from our production and from installed equipment.

Diverter valve technical data

The technical data are defined for each application:

  • Type – two-way, three-way or butterfly
  • Cross-section – to order, to match the pipes on site
  • Material handled – grain, feed, cement and powdered materials
  • Drive – manual, electric or pneumatic
  • Outlet angle – to order
  • Construction – carbon (mild) steel with primer and paint

Every diverter valve is designed for the real conditions – material, capacity and the pipes on site.

All manufacturing is done in-house, so we work to tight schedules without unnecessary delays. We use quality components and careful workmanship.

Open butterfly valve with disc on shaft
Why work with Silozni Sistemi

Why work with us

Choosing a supplier of industrial equipment matters – especially for machines that run every day. Here is what our clients value:

  • Experience and an engineering approach – for more than 14 years we have designed and built systems for conveying and storing bulk materials, from single machines to complete lines.
  • Equipment for real site conditions – instead of catalogue models, we design each machine for the material, the capacity and the layout on site.
  • In-house manufacturing – bodies, flaps and structures are made in our workshop, while motors and pneumatic components come from trusted suppliers. This combines flexibility, accuracy and consistent quality.
  • Working closely with the client – we discuss every step, from the valve type to the connections with pipes and conveyors, to get the best result for your site.
  • Proven in industry – our machines and systems run in many sectors, from grain terminals and feed mills to power generation and heavy industry.
FAQ

Questions and answers about diverter valves

What does a diverter valve cost and do you have any in stock?

We do not keep diverter valves in stock. Each one is made to order – to suit the cross-section, material, drive and the pipes on site, and these set the price. We send an offer with price and lead time once we have your data.

Two-way or three-way valve?

A two-way valve has one inlet and two outlets, a three-way valve has one inlet and three outlets. A three-way valve is used when three silos or hoppers have to be filled from one point.

Which drive should I choose?

Manual with a lever, electric with a motor or pneumatic with a cylinder. The choice depends on how often the valve is switched and whether it is controlled from a panel.

Will the valve fit my pipes?

Yes. The flanges, cross-section and outlet angle are made to match the pipes and machines the valve connects to on site.

Why a diverter valve instead of a second conveyor?

With a diverter valve, one conveyor fills two or three silos. You do not need a separate conveyor for each silo or hopper.

Do you deliver and install? What is the warranty?

We deliver across Europe; transport is quoted separately in the offer. We do not install outside Bulgaria – the valve is shipped ready to install, with drawings and instructions in English. The warranty is 12 months and the lead time is about 20 working days plus transport.

Contact

Contact us for a diverter valve built to order.