Sweep augers

A sweep auger (silo unloading auger) is installed on the floor of a flat-bottom silo and clears the material that does not flow out on its own. Usually about 90% of the silo empties by gravity – the sweep auger then finishes the job.

The auger rotates 360° around the centre of the silo and moves the grain to the central outlet. Its length equals the silo radius, so every sweep auger is built to the dimensions of the specific silo.

  • Unloading of flat-bottom silos
  • 360° rotation around the silo centre
  • For silos 6 to 20 m in diameter
  • No manual shovelling of the remaining material
  • Heavy-duty or economy version
Sweep auger in a flat-bottom silo

With every sweep auger, Silozni Sistemi offers

Sweep (silo unloading) auger – end section

Sweep auger applications

Sweep augers are used in flat-bottom silos, where part of the material stays on the floor after gravity discharge. They save manual labour and the time needed to clean the silo.

They are used to discharge:

  • Grain – wheat, barley, rye, triticale and others
  • Maize (corn)
  • Sunflower and oilseeds
  • Feed raw materials
  • Other bulk products stored in silos

The sweep auger works together with the discharge conveyor under the silo – a screw, belt or chain conveyor.

Sweep auger design

Our sweep augers include the following main parts:

  • Screw flight with shaft – diameter Ø130 to Ø350 mm, depending on the capacity and the silo size.
  • Supporting structure – carbon steel. Takes the load from the stored material and the drive.
  • Centre pivot (in the centre of the silo) – the auger turns 360° around it across the floor.
  • Motor and gearbox – directly mounted Motovario® or Motive® geared motor, sized for the length and the product.
  • Bearings – for stable and smooth running of the flight.
  • Direct coupling – the geared motor is coupled directly to the auger, with no belt or chain drives.
  • Made to size – the length equals the silo radius, from 3 to 10 m.
3D design of a sweep auger
Sweep auger design

Benefits of our sweep augers

Reliable – robust construction designed to work under the stored material.

Compact – installed on the floor, they take up no silo volume.

Heavy-duty or economy – the version is chosen by product, silo volume and load.

Quick installation – built to the silo dimensions and delivered ready for installation.

Good value – in-house manufacturing gives a fair price without compromising on quality.

Options and configurations for sweep augers

Depending on the silo and the product, you can choose:

  • Heavy-duty version – for larger silos and heavier loads
  • Economy version – for smaller silos and lighter loads
  • Length to suit the silo – matched to the radius of your silo
  • Geared motor – Motovario or Motive, sized for the required power
Screw flight with shaft

Sweep auger technical data

The technical data depend on the silo size and the product:

  • Capacity – 1 to 100 m³/h
  • Length – 3 to 10 m (the silo radius)
  • Flight diameter – Ø130 to Ø350 mm
  • Silo diameter – 6 to 20 m
  • Drive power – 2.2 to 11 kW
  • Material – carbon steel with primer and paint, or stainless steel where required

Every sweep auger is designed for the actual dimensions of the silo and the type of product.

All manufacturing is done in-house, so we work to tight schedules without unnecessary delays. The design is easy to install and maintain.

Sweep auger in a silo
Why work with Silozni Sistemi

Why work with us

Choosing a supplier of industrial equipment matters – especially for machines that run every day. Here is what our clients value:

  • Experience and an engineering approach – for more than 14 years we have designed and built systems for conveying and storing bulk materials, from single screw conveyors to complete lines.
  • Equipment for real site conditions – instead of catalogue models, we design each machine for the material, the capacity and the layout on site.
  • In-house manufacturing – screw flights, housings and structures are made in our workshop, while motors, gearboxes and bearings come from trusted suppliers. This combines flexibility, accuracy and consistent quality.
  • Working closely with the client – we discuss every step, from the choice of conveyor type to the installation details, to get the best result for your site.
  • Proven in industry – our screw conveyors and systems run in many sectors, from grain terminals and feed mills to heavy industry.

Contact

Contact us for a sweep auger built to the dimensions of your silo.