Rotary valves

A rotary valve (rotary airlock, rotary feeder, cell wheel sluice) feeds bulk material evenly and in an exact quantity – from a hopper, silo or cyclone to a screw conveyor, belt conveyor or the next machine.

We build carbon steel rotary valves to order – with the rotor size, width and drive chosen for the material and the required capacity.

  • Even, controlled feeding of material
  • Seals the hopper outlet – no uncontrolled flow
  • Limits dust and material losses
  • Geared motor selected for the capacity
  • Built to the dimensions of your site
Carbon steel rotary valve, front view

With every rotary valve, Silozni Sistemi offers

Rotary valve with stand and geared motor, side view

Rotary valve applications

The rotary valve sits under a hopper, silo or cyclone and feeds the material at a constant rate. The next machine – screw conveyor, belt conveyor or elevator – then runs evenly and without overload.

They are used for:

  • Dosing from hoppers and silos – grain, feed, flour, pellets, wood particles, granulates and more
  • Feeding fuel and materials in power plants
  • Discharge under cyclones and filters
  • Feeding screw and belt conveyors
  • Production lines that need accurate dosing

One of our rotary valves, with a Ø273 mm rotor and 350 mm width, works in a power plant and feeds about 10 m³/h.

Rotary valve design

Our rotary valves include the following main parts:

  • Cell rotor – a shaft with radial vanes that form the cells. The diameter, width and number of vanes are chosen for the material and the capacity.
  • Housing – carbon steel, with an accurately machined inner surface for a small clearance between rotor and housing.
  • Inlet and outlet flanges – size and holes made to match the hopper above and the machine below.
  • Motor and gearbox – Motive® geared motor (Italy), selected for the power and speed needed for the flow rate.
  • Bearings – bearing units on both sides of the shaft, outside the material zone.
  • Seals – seal the shaft and keep dust from escaping.
  • End covers – removable for inspection and cleaning of the rotor.
Rotary valve drive with Motive geared motor
Motive geared motor on a rotary valve

Benefits of our rotary valves

Accurate dosing – the amount of material is set by the cell volume and the rotor speed.

Safe and reliable operation – robust housing and correctly selected bearings for continuous duty.

Easy maintenance – the main components are accessible and the spare parts are standard.

Quick installation – delivered ready for installation, with flanges to suit your site.

Good value – in-house manufacturing gives a fair price without compromising on quality.

Options and configurations for rotary valves

Depending on the site, rotary valves can be fitted with:

  • Frequency inverter – to adjust the speed and the flow rate
  • Transitions and spouts – to connect to a hopper, screw conveyor or belt conveyor
  • Slide gate valve – above the rotary valve, to close it during maintenance
  • Rotation sensor – signals when the rotor stops
Rotary valve inlet flange

Rotary valve photos

Photos from our production and from installed equipment.

Rotary valve technical data

The technical data are defined for each application:

  • Capacity – up to 10 m³/h with a Ø273 × 350 mm rotor; higher on request
  • Rotor diameter – Ø219 and Ø273 mm; other sizes on request
  • Rotor width – up to 350 mm; on request
  • Drive – Motive® geared motor (Italy), on request
  • Drive power – according to the capacity, on request
  • Material – carbon steel with primer and paint

Every rotary valve is designed for the real conditions – material, capacity, the hopper above and the machine below.

All manufacturing is done in-house, so we work to tight schedules without unnecessary delays. We use quality components and careful workmanship.

Rotary valve with inlet flange and Motive geared motor, built by Silozni Sistemi
Why work with Silozni Sistemi

Why work with us

Choosing a supplier of industrial equipment matters – especially for machines that run every day. Here is what our clients value:

  • Experience and an engineering approach – for more than 14 years we have designed and built systems for conveying and storing bulk materials, from single machines to complete lines.
  • Equipment for real site conditions – instead of catalogue models, we design each machine for the material, the capacity and the layout on site.
  • In-house manufacturing – rotors, housings and structures are made in our workshop, while motors, gearboxes and bearings come from trusted suppliers. This combines flexibility, accuracy and consistent quality.
  • Working closely with the client – we discuss every step, from the size of the valve to the connections with the hopper and the conveyor, to get the best result for your site.
  • Proven in industry – our machines and systems run in many sectors, from grain terminals and feed mills to power generation and heavy industry.
FAQ

Questions and answers about rotary valves

What does a rotary valve cost and do you have any in stock?

We do not keep rotary valves in stock. Each one is made to order – to suit the material, the required capacity and the flanges of the hopper and the machine below, and these set the price. We send an offer with price and lead time once we have your data.

Rotary valve, rotary airlock or rotary feeder – is there a difference?

No, it is the same machine. It feeds bulk material evenly and in an exact quantity from a hopper, silo or cyclone.

How is the amount of material set?

By the volume of the pockets and the rotor speed. The diameter, width and number of vanes are chosen for the material and the required capacity.

Where is the rotary valve installed?

Under a hopper, silo or cyclone. It feeds the material to a screw conveyor, belt conveyor or bucket elevator, so the next machine runs evenly and without overload.

What capacity is realistic?

It depends on the rotor size and speed. For example, one of our rotary valves with a ∅273 mm rotor and 350 mm width feeds about 10 m³/h at an energy plant.

Do you deliver and install? What is the warranty?

We deliver across Europe; transport is quoted separately in the offer. We do not install outside Bulgaria – the rotary valve is shipped ready to install, with drawings and instructions in English. The warranty is 12 months and the lead time is about 20 working days plus transport.

Contact

Contact us for a rotary valve built to order.