Stainless steel screw conveyors
Stainless steel screw conveyors are designed for applications with higher demands on the material, corrosion resistance and service life. They are built to order as tubular screw conveyors or U-trough screw conveyors, depending on the application.

What is stainless steel
Stainless steel is a structural material for equipment that works in demanding environments. Its key property is corrosion resistance, achieved through its chromium and nickel content.
Chromium protects the surface when it is exposed to moisture and air, while nickel improves the stability of the steel under load and temperature changes. This makes stainless steel the preferred choice where a long service life and minimal maintenance are required.
Stainless steel grades
There are different stainless steel grades, depending on the content of alloying elements and carbon. The most common grades in industrial applications are:
AISI 304
1.4301
The most widely used stainless steel. Suitable for standard industrial conditions that require good corrosion resistance and stable material behaviour.
AISI 304L
1.4307
A low-carbon version of AISI 304. Used for structures with many welds, as it reduces the risk of problems around the weld seams.
AISI 316
1.4401
Contains molybdenum, which improves resistance in more aggressive environments compared with AISI 304. Used where the requirements on the material are higher.
AISI 316L
1.4404
A low-carbon version of AISI 316. Suitable for welded structures and applications with high demands on durability and long-term resistance.
Types of stainless steel screw conveyors
Stainless steel screw conveyor applications
Stainless steel screw conveyors are used in processes where the material is in direct contact with the equipment and must be conveyed in a controlled way without contamination.
In practice they are used for:
Depending on the process, the conveyors are built as tubular or U-trough designs and integrated with hoppers, silos and other conveying systems.
Stainless steel screw conveyor design
The design of a stainless steel screw conveyor depends mainly on the conveying method and its position in the system. There is no universal version – every part is matched to the configuration of the line.
The screw flight is made of stainless steel, with a geometry suited to the material and the operating mode. The casing can be tubular or U-trough, depending on the access, cleaning and maintenance required.
The bearings are chosen according to the length and the load – end bearings and, where needed, intermediate (hanger) bearings. The drive is a geared motor, positioned for easy installation and removal during maintenance.
This approach lets us adapt the design to the real site conditions, without unnecessary compromises.
In practice they are used for:
Built to order
Every stainless steel screw conveyor starts from the specific application, not from a catalogue model. At the specification stage we clarify how the material will be fed, where the conveyor will sit and how it will connect to the rest of the equipment.
On this basis we define the casing type, the flight design, the position of inlets and outlets and the installation method. This avoids corrections on site and gives an exact fit in the system.
Each conveyor is built to the parameters of the project, so it can go straight into operation without further modifications.
In practice they are used for:
Stainless steel screw conveyor photos
Photos and details from our projects, showing the equipment we have built.
Contact
Contact us to discuss your application and the right design solution.
















