Project: Process line for conveying bulk granulate

Home » Projects » Project: Process line for conveying bulk granulate

Brief

The client needed a complete process line for conveying fine, dry bulk granulate – from receiving the material to feeding it to the next machines and filling big bags. It had to fit into an existing production hall.

All machines had to work as one continuous line – from emptying big bags into the intake hopper, through even dosing, to lifting the granulate to the next machine.

How the process line works

The material is emptied from big bags into a large intake hopper made of AISI 304 stainless steel.

At the bottom of the hopper there is an agitator that stirs the granulate and directs it to the screw conveyor. Above the agitator, along its whole length, there is a stainless steel pyramid. It takes the impact and weight of the falling material. Without it the agitator shaft would be heavily loaded and could quickly break. When the hopper is empty, the agitator stops in a vertical position, ready for the next big bag.

Under the agitator there is a twin U-trough screw conveyor, ∅180 mm, with a PTFE coating. Both shafts are driven by one geared motor, and a pair of gears transfers the rotation from one shaft to the other. The screw conveyor feeds the material evenly to the inclined belt conveyor.

Conveying and control

The belt conveyor has a 500 mm rubber belt. It lifts the granulate to the next machine in the production line.

The line is prepared for automatic control. Encoders monitor the agitator position, the rotation of each screw shaft and both belt drums. If a shaft stops or the belt starts to slip, the operator gets a signal and the machine stops.

We designed the process line as a whole and built all the machines in our workshop. Manufacturing, delivery and on-site installation were all done by us – including the support structure and the connections between machines.

Machines in the production line

  • Intake hopper – AISI 304 stainless steel, for material from big bags
  • Agitator with protective pyramid – the stainless steel pyramid runs along the whole length of the agitator
  • Twin U-trough screw conveyor ∅180 mm – AISI 304 stainless steel, PTFE-coated, with gears between the two shafts
  • Inclined belt conveyor – 500 mm cleated rubber belt, drive and tension drums, carrying and return rollers
  • Support structure and connections between machines
  • Drive – geared motors with IE2 motors
  • Encoders – on the agitator, the screw shafts and the belt drums, to monitor the operation of the line
  • Access platform – for servicing the hopper

Conveyed material: fine, dry bulk granulate.

See photos

AISI 304 stainless steel intake hopper on a support structure
Stainless steel pyramid in the intake hopper, above the agitator
Intake hopper and the start of the belt conveyor
Rubber conveyor belt with cleats on an inclined conveyor
Twin U-trough screw conveyor ∅180 mm in stainless steel
Geared motor and gears of the twin U-trough screw conveyor under the hopper
Outlet of the twin U-trough screw conveyor onto the belt conveyor
Discharge of an inclined belt conveyor to the next machine in the line
Inclined cleated belt conveyor installed in a production hall
Two gears transferring rotation between the shafts of the twin screw conveyor
Steel assembly from the granulate conveying line
Support structure of the bulk granulate line

Looking for a similar solution?

See the rubber belt conveyors and tubular screw conveyors we manufacture, or contact us for a process line to your specification.

Subscribe to our newsletter

Get news about completed projects, technical articles and practical solutions for conveying systems. We send only useful content – no spam.

Similar Posts