A used screw conveyor looks like a quick and cheap way to solve the problem: the machine is available and the price is lower than new. But if the dimensions, capacity or condition do not match, the money saved goes on rework, repairs and downtime. Here is what to check before you decide.
1. Dimensions and inlet/outlets
A screw conveyor is made for a specific place: length, diameter, inlet and outlet positions, angle. If the used one is longer, shorter or has outlets in other places, it will need rework – and that means extra time and money.
2. Capacity for your material
Screw conveyor capacity depends on the material, the incline and the speed. A conveyor that has handled pellets may not give the same capacity with cement or sand. Ask what it conveyed and at what angle, and compare with your needs.
3. Flight and casing
Inspect the flight for wear on the outer edge, especially if it has handled abrasive materials. A worn flight reduces capacity and increases load. Also check the casing – tube or trough – for wear-through and cracks.

4. Bearings and seals
Turn the shaft by hand and listen to the bearings. Play, noise or traces of material around the bearings show that they will soon need replacing.

5. Geared motor
Check whether the geared motor suits your material and capacity, and what condition it is in. A drive chosen for a light material may not cope with a heavier one. If possible, see the conveyor running.

When it makes sense and when it does not
A used screw conveyor makes sense when the dimensions and material match almost exactly and the condition is good. If the flight, bearings and drive have to be replaced and the casing reworked, the cost often comes close to a new conveyor made exactly for the site. More on this calculation in the article Repair or new machine: which pays off when.
What to send us
If you are unsure, send us photos and dimensions of the used conveyor and data on your material and capacity. We will tell you whether it can be used and what needs repairing, or offer you a new conveyor.
Looking for a similar solution?
See the new screw conveyors we manufacture, or contact us for a quotation to your specification.
Subscribe to our newsletter
Get news about completed projects, technical articles and practical solutions for conveying systems. We send only useful content – no spam.





